블로그 이미지
Morning lark

카테고리

분류 전체보기 (1770)
Fuel Cell (835)
New Energy (811)
Energy Storage (6)
New Biz Item (2)
Total
Today
Yesterday

Helmholtz-Zentrum Berlin für Materialien und Energie

A team has developed a highly efficient alkaline membrane electrolyser that approaches the performance of established PEM electrolysers. What makes this achievement remarkable is the use of inexpensive nickel compounds for the anode catalyst, replacing costly and rare iridium.

 

Hydrogen will play a major role in the energy system of the future, as an energy storage medium, a fuel and valuable raw material for the chemical industry. Hydrogen can be produced by electrolysis of water in a virtually climate-neutral way, provided this is done with electricity from solar or wind power. Scale-up efforts for a green hydrogen economy are currently largely dominated by two systems: proton-conducting membrane electrolysis (PEM) and classic liquid alkaline electrolysis. AEM electrolysers combine the advantages of both systems and, for example, do not require rare precious metals such as iridium.

Alkaline Membrane (AEM) Electrolysers without Iridium

Now, research teams from TU Berlin and HZB, together with the Department of Microsystems Engineering (IMTEK) at the University of Freiburg and Siemens Energy, have presented the first AEM electrolyser that produces hydrogen almost as efficiently as a PEM electrolyser.

Instead of iridium, they used nickel double hydroxide compounds with iron, cobalt or manganese and developed a process to coat them directly onto an alkaline ion exchange membrane.

Insight into molecular processes during electrolysis at BESSY II

During the electrolysis in the cell, they were able to carry out operando measurements at the Berlin X-ray source BESSY II at the LiXEdrom end station.

A theory team from Singapore and the USA helped to interpret the experimental data.

'This enabled us to elucidate the relevant catalytic-chemical processes at the catalyst-coated membrane, in particular the phase transition from a catalytically inactive alpha phase to a highly active gamma phase and the role of the various O ligands and Ni4+ centres in the catalysis,' explains Prof.

Peter Strasser, TU Berlin. 'It is this gamma phase that makes our catalyst competitive with the current state-of-the-art iridium catalysts.

Our work shows important similarities to iridium in the catalytic mechanism, but also some surprising molecular differences.'

The study has thus significantly advanced our understanding of the fundamental catalysis mechanisms of the new nickel-based electrode materials. In addition, the newly developed coating method for the membrane electrode promises excellent scalability. A first fully functional laboratory cell has already been tested at IMTEK. The work lays the foundation for further industrial evaluation and demonstrates that an AEM water electrolyser can also be highly efficient.

 

  1. M. Klingenhof, H. Trzesniowski, S. Koch, J. Zhu, Z. Zeng, L. Metzler, A. Klinger, M. Elshamy, F. Lehmann, P. W. Buchheister, A. Weisser, G. Schmid, S. Vierrath, F. Dionigi, P. Strasser. High-performance anion-exchange membrane water electrolysers using NiX (X = Fe,Co,Mn) catalyst-coated membranes with redox-active Ni–O ligands. Nature Catalysis, 2024; DOI: 10.1038/s41929-024-01238-w

Recent efforts in anion-exchange membrane water electrolysis (AEMWE) focus on developing superior catalysts and membrane electrode assemblies to narrow the performance gaps compared with proton-exchange membrane water electrolysis (PEMWE). Here we present and characterize Ir-free AEMWE cells with NiX (X = Fe, Co or Mn) layered double hydroxide (LDH) catalyst-coated membranes with polarization characteristics and hydrogen productivities approaching those of acidic PEMWE cells, achieving >5 A cm−2 at <2.2 V. Operando spectroscopy revealed a correlation between Ni4+ centres and redox-active O ligands with an O K-edge feature, attributed to µ3-O ligands in the γ-LDH catalytic phase via density functional theory calculations. This computational–experimental study challenges the previously assumed correlation between spectral O K-edge features and oxygen evolution reaction performance in Ni-based LDH catalysts and provides insights from the molecular to the technological level demonstrating how redox-active Ni–O species and innovative catalyst-coated membrane preparation boost AEMWE performance to values rivalling state-of-the-art PEMWE cell technology.

 

Hydrogen: Breakthrough in alkaline membrane electrolyzers | ScienceDaily

 

Posted by Morning lark
, |
  • Boch has unveiled a cutting-edge coating technology in Suzhou, China, aimed at enhancing the durability and performance of fuel cell stacks.
  • This breakthrough is expected to significantly drive the adoption of electric vehicles by improving the lifespan and efficiency of critical components like bipolar plates.

Boch, a leader in the sustainable energy sector, recently announced a major advancement in hydrogen technology with the development of a new coating process for fuel cell stacks. The technology focuses on protecting bipolar plates from corrosion, a critical factor in the lifespan and functionality of fuel cells. This enhancement is poised to accelerate the adoption of electric vehicles globally.

The innovative process, developed by Boch's team in Suzhou, China, employs physical vapor deposition (PVD) coatings. This method allows for a versatile application on various flat substrates crucial to fuel cell operation, such as plates used in Proton Exchange Membrane Fuel Cells (PEMFC) and electrolyzers. The array of materials that can be coated includes chromium (Cr), titanium (Ti), tungsten (W), carbon (C), diamond-like carbon (DLC), gold (Au), platinum (Pt), chromium nitride (CrN), and titanium nitride (TiN).

“Our team in Suzhou, China developed a unique design that offers full flexibility, allowing us to coat a wide variety of flat substrates, such as bipolar plates for PEMFC or electrolyzers. Various materials can be coated, including Cr, Ti, W, C, DLC, GLC, Au, Pt, CrN, TiN and more," explained a spokesperson from Boch.

The main advantages of this technology include its modular design, which simplifies the rapid scaling of production to meet market demands. Additionally, the technology is designed to be highly adaptable for retrofitting, enhancing its appeal in rapidly evolving markets. Another significant benefit is the process's low coating temperature, which remains below 200°C.

This feature is crucial as it prevents deformation of the substrates while ensuring the material retains its toughness and integrity.

This technological advancement from Boch is set to transform the landscape of hydrogen fuel technology by providing a more robust and efficient means of managing fuel cell components, thereby promoting greater uptake of clean energy vehicles.

Boch's Fuel Cell Coating Tech for Enhanced Efficiency (fuelcellsworks.com)

 

Posted by Morning lark
, |

Trina Green Hydrogen has initiated its first 1GW electrolyser production line at its new facility in Yangzhou, marking a significant step in China's hydrogen energy sector.

The launch of this production line is part of a larger plan to expand the facility's capacity to 4GW, aiming to support China's carbon neutrality goals with advanced hydrogen production technologies.

Advanced Production Capabilities Set to Transform Hydrogen Energy Sector

Trina Green Hydrogen, a subsidiary of Trina Solar, one of the world’s leading solar panel manufacturers, has officially started operations at its new electrolyser production line in Yangzhou, eastern China. The production facility, known as the Tianhe YuanHydrogen Yangzhou Production and R&D Base, was inaugurated in a ceremony attended by key figures such as Yangzhou Municipal Party Committee Secretary Wang Jinjian, China Industrial Development Promotion Association Vice President Shi Lishan, and Tianhe YuanHydrogen Chairman Gao Haichun.

Located in the Yangzhou Comprehensive Bonded Zone, the facility represents a substantial investment of RMB 720 million and spans nearly 150 acres with a building area exceeding 60,000 square meters. This first phase includes a 1GW production line for alkaline water electrolysis hydrogen production equipment, with future plans to increase the total capacity to 4GW. This expansion is set to make the Yangzhou base the most modern and comprehensive automated and intelligent production base in the world.

Commitment to High-Quality Hydrogen Development

During the ceremony, Gao Haichun highlighted the significance of accelerating hydrogen energy development to achieve China's "carbon peak and carbon neutrality" goals and its role in the global energy transition. Trina Hydrogen is dedicated to advancing research and development in critical technology areas and fostering ecological cooperation across the hydrogen energy industry chain—from production and storage to transmission and utilization.

Shi Lishan emphasized the importance of hydrogen production via water electrolysis as a key solution for the large-scale development of new energy, noting the diverse applications of hydrogen as both a raw material and an energy source. The completion of this production line marks a significant advancement in China’s hydrogen energy sector.

Yangzhou's Hydrogen Energy Industry Leadership

 Zhang Li, secretary of the Party Working Committee of the Yangzhou Economic and Technological Development Zone, expressed that Yangzhou has an early start and a relatively complete industrial chain in the hydrogen energy sector. The establishment of Tianhe Yuan Hydrogen in Yangzhou signifies a major upgrade to the local hydrogen energy industry, positioning the city as a leader in hydrogen energy technology and contributing Chinese solutions to global environmental and energy challenges.

Innovative and Smart Production Line The newly launched production line boasts the world’s largest alkali tank production capability and features advanced technology such as a 10MW equipment testing platform, an electrochemical/anti-corrosion production and research base, and a CNAS-certified laboratory in the hydrogen energy field. The 1GW line integrates cutting-edge technologies including automatic control, acoustic and optical detection, and big data analytics to achieve a "4 100%" intelligent production line—100% automation, 100% quality self-determination, 100% product digitization, and 100% information sharing.

Strategic Partnerships and Bright Future At the launch, Tianhe YuanHydrogen also signed strategic cooperation agreements with Ruilu Hydrogen Energy (Group) Co., Ltd. and Spain’s GHENOVA Group. These partnerships aim to leverage brand, technology, and customer advantages to establish a long-term, mutually beneficial cooperation framework.

With the hydrogen energy industry still in the early stages of development in China, this sector holds broad prospects for growth. It requires close collaboration among all players in the industry chain, bold innovation, and active exploration to continue advancing the hydrogen energy industry.

Trina Green Hydrogen Launches 1GW Electrolyser Line in China (fuelcellsworks.com)

 

Posted by Morning lark
, |

 

Verdagy has opened the first electrolyzer manufacturing facility in the United States supported by the U.S. Department of Energy (DOE). Located in Newark, California, the new Silicon Valley factory spans over 100,000 square feet and has the capacity to produce several gigawatts of electrolyzers.

 

The factory, first announced in 2023, was awarded a $39.6-million grant from the DOE in March 2024 to accelerate high-volume production of Verdagy’s advanced alkaline eDynamic® electrolyzers. Full-scale production is slated to begin in the first quarter of 2025.

 

Peter Cousins, COO of Verdagy, commented: “With deep experience in both utility-scale solar and automotive battery manufacturing, we knew the importance of designing and solving for scale from the very beginning. This motivated us to look end-to-end as we approached green hydrogen electrolyzer manufacturing.

 

“Verdagy partnered with ATI to optimize everything, with innovations from molten metal through coils to completed electrolyzer cells. Our new multi-gigawatt factory in California is intentionally simple, precisely what is needed to solve for the scale and fossil parity costs required to decarbonize hard-to-abate industries.”

 

Verdagy’s manufacturing process will begin with ATI’s metal coils and produce finished electrolyzer cells by vertically integrating subassemblies with minimal manual handling and processing. This streamlined approach, coined ‘Coils-to-Cells,’ was developed in partnership with ATI.

 

“ATI’s partnership with Verdagy is an ideal opportunity for our high-performing, high-quality materials in the specialty energy market,” said Tom DeLuca, President, ATI Specialty Rolled Products.

 

The ‘Coils-to-Cells’ manufacturing system aligns with the DOE’s goal of supporting domestic electrolyzer manufacturing through a domestic supply of metals, thereby fostering a ripple effect on domestic production.

 

Source:  Hydrogentechworld

Posted by Morning lark
, |

 

The EU has awarded up to €36 million to thyssenkrupp nucera to support the construction of a 300-MW green hydrogen production plant utilizing the company’s high-temperature SOEC technology.

 

This funding from the EU Innovation Fund aims to advance the industrialization of thyssenkrupp nucera’s highly efficient SOEC technology, licensed from Fraunhofer IKTS, through the construction of an SOEC production facility. Further project details are to be finalized in collaboration with the EU.

 

Dr. Werner Ponikwar, CEO of thyssenkrupp nucera, said: “The EU is sending an important signal with its decision to support the construction of the SOEC production plant. Due to its high level of efficiency and great cost effectiveness, high-temperature electrolysis technology is a pioneering electrolysis technology to produce green hydrogen. It will enable companies to make an important contribution to decarbonization in the near future.”

 

Ahead of the large-scale production plant, a pilot facility with 8 MW of installed SOEC capacity is expected to begin operations in the first half of 2025.

 

The electrolyzer stacks will initially be produced in small quantities in Arnstadt, Thuringia. “Scaling up the production of the SOEC stacks will enable thyssenkrupp nucera to achieve technology and market leadership in the pioneering SOEC technology,” said Professor Dr. Alexander Michaelis, Director of the Fraunhofer IKTS.

 

thyssenkrupp nucera and the Fraunhofer Institute for Ceramic Technologies and Systems (IKTS) formed a strategic partnership in March, focusing on developing high-temperature electrolysis (SOEC) technology for market readiness. Fraunhofer IKTS has laid the groundwork for SOEC technology over 20 years of extensive R&D, providing the essential foundations for industrialization. The two organizations are now working together to advance high-temperature electrolysis towards large-scale industrial application.

 

Source:  Hydrogentechworld

Posted by Morning lark
, |